48 Inch x 80 Inch (4068) Metal Exit Commercial Door Kit, Includes Heavy Duty Steel Door, Frame For Exterior Wood Stud, Metal Stud, or Masonry Wall, and Push To Exit Panic Bar Hardware, Rust Inhibiting Gray Primer Finish
Designed For Installation On Exterior Walls
The Gladiator exterior commercial metal door kit is an easy to install door system designed for installation on exterior walls of all construction types. Each door frame includes anchors specific for your door installation application. Below are the common types of door frame mounting anchors to choose from. Each anchor is used for a specific exterior wall type:
- Wood or Metal Stud Anchors: Used on existing exterior walls constructed from wood studs or metal studs. Designed to be used on a building wall that has already been built. Door frame sets into rough opening and uses anchors to attach to wood or metal stud wall.
- Masonry Tee Anchors: Used on CMU, Block, Brick, or any other type of masonry wall that has not been built yet. Door frame sets in place, and the masonry wall is erected around the door frame.
- Masonry Wire Anchors: Used on CMU, Block, Brick, or any other type of masonry wall that has not been built yet. Door frame sets in place, and the masonry wall is erected around the door frame.
- Butterfly Anchors With Masonry Sleeve Bolts: Used on any existing CMU, Block, Brick, or Masonry wall opening. Door frame sets into rough opening, and attaches using the masonry sleeve bolts.
- Butterfly Anchors With Masonry Wood Screws: Used on any existing non-masonry wall opening. Door frame sets into rough opening, and attaches using the wood screws provided.
- Punch and Dimple With Masonry Sleeve Bolts: Used on any existing CMU, Block, Brick, or Masonry wall opening. Door frame sets into rough opening, and attaches using the masonry sleeve bolts.
- Punch and Dimple With Masonry Wood Screws: Used on any existing non-masonry wall opening. Door frame sets into rough opening, and attaches using the wood screws provided.
Door Frame Jamb Depth
The door frame is manufactured from 16 gauge steel and is designed to butt directly against the wall thickness. We offer a door frame jamb depth for all of the building code compliant wall types:
- 5-3/4" Jamb Depth (Most Common) - Designed to butt against a wall with an overall thickness greater than 5-3/4"
- 4-3/4" Jamb Depth - Designed to butt against a wall with an overall thickness greater than 4-3/4"
- 7-3/4" Jamb Depth - Designed to butt against a wall with an overall thickness greater than 7-3/4"
- 8-1/4" Jamb Depth - Designed to butt against a wall with an overall thickness greater than 8-1/4"
Unsure Of What Jamb Depth You Need?
Exterior door frames are always installed butted against the wall, and held to the outside of the building. Most exterior walls are wider than 5-3/4 inches, therefore the most common exterior door frame jamb depth used is the 5-3/4" jamb depth. In any scenario, since the door frame is butted against the wall, you will want to make sure that the door frame jamb depth is less than that of the overall wall thickness.
Before You Order
Before you place your order be sure to verify the rough opening requirements for this door as well as consider the following additional options available.
Rough Opening Requirements
- Frame designed to butt against an exterior wall
- Rough Opening: 52-1/2" Wide x 82-1/4" Tall
Optional Outside Lever Handle For Panic Bar
This Gladiator metal door kit includes the option to add an outside lever handle to the door. The standard metal door kit includes no outside lever, so the door operates strictly as an exit only door. However, if the door application is for a rear entry door, then a lever handle will be necessary. If the outside lever handle option is selected, please note that the function of the lever handle, or how it operates must be chosen.
Outside Lever Handle Functions
This Gladiator metal door kit has the option to include an outside lever handle to access the door. If an outside lever handle is chosen, the function of the lever handle must be selected. The following lever functions can be chosen below depending on your door application. For example, if this metal door is going to be used as a rear entry door to a warehouse, then the "Entrance" function would be selected.
- Entrance: Key locks and unlocks lever.
- Storeroom: Key operates lever, otherwise always locked.
- Passage: Lever always operable and free.
Optional Commercial Door Closer
A commercial door closer is a hydraulic device that regulates the closing speed of the door and will automatically close the door after it has been used. Commercial door closers help lengthen the life of your commercial metal door and also act as a safety device preventing the door from slamming closed on any one. As the manufacturer it is recommended to include the door closer.
Optional Door Threshold
A door threshold is an aluminum bottom plate designed to span across the foot of the doorway. It provides a seal and barrier under the door to prevent water, insects, and other debris from entering under the door way. As the manufacturer it is recommended to include the door threshold.
Optional Door Sweep
A door sweep is a weatherstripping device designed to mount to the bottom of the door. It is available with nylon bristles or a vinyl gasket and is used to seal the gap between the bottom of the door and the threshold. Weatherstripping plays an important role in improving your building's energy efficiency as well as pest control. As the manufacturer it is recommended to include a door sweep.
Optional Door Frame Weather Stripping
Door frame weather stripping is available as either a stick on gasket or a screw mounted bulb gasket. Both types are designed to eliminate the gap between the door and frame, providing your building with better energy efficiency. As the manufacturer it is recommended to include some form of door frame weather stripping.
Optional Commercial Door Stop
If your metal door is going to be installed in a location where the door can hit the wall when it is fully open, then a wall stop or floor stop is recommended. Door stops help prevent damage to your wall and door. Each time a door slams open against the wall, the impact travels through the door, hardware, and into the frame. This can cause the frame and door to bend as well as damage to the hardware.
Optional Door Holder
A kick down door holder or crash chain door holder are also available which allows the user to hold the door open. This option is great for storerooms or closet doors where pedestrians are constantly restocking or moving in and out of the room.
Optional Fire Label
If the commercial door is going to be installed on a fire wall, we offer a variety of fire ratings to choose from up to 3 hours.
This Gladiator Metal Door Kit Includes
- 1 Each Gladiator Commercial 18 Gauge Heavy Duty Steel Door
- 1 Each Gladiator Commercial 16 Gauge Heavy Duty Steel Knock Down Frame For Butting Against Exterior Wall
- 3 Each Commercial Heavy Duty Ball Bearing Hinges
- 1 Each Commercial Heavy Duty Panic Rated Push Pad Exit Device
Features
Heavy Duty
The Gladiator metal door is commercial industrial grade and manufactured from 18 gauge steel. The door is well insulated with a full body of polystyrene, providing energy efficiency to your building. Top and bottom caps provide additional structural integrity to the Gladiator metal door so that it will not bend or deflect. 12 gauge closer reinforcement as well as 7 gauge hinge reinforcement allows the Gladiator metal door to provide smooth opening and closing for years, without the hassle of the commercial door hardware breaking down.
Galvannealed and Rust Inhibiting Finish
Each Gladiator metal door and frame is Galvannealed, allowing it to help prevent rust. Additionally, each metal door and frame comes with a baked on prime coat finish. This primer is rust inhibiting also helping to prevent rust.
Insulated Core - Not Hollow Core!
Gladiator metal doors come with a premium insulating core known as polystyrene. Lower grade metal doors are not insulated or feature cardboard insulation known as honeycomb. Our polystyrene core will help maintain your building's energy year round. The insulated door will also provide more sound deadening than that of a hollow core metal door.
Anti Jimmy Hinges
Included on each Gladiator commercial metal door are anti-jimmy ball bearing hinges preventing vandals from removing the door hinges. These heavy duty security hinges provide safety and peace of mind for your commercial building.
Security Door Handle
Each Gladiator commercial door comes equipped with a commercial grade lever handle to ensure proper security and durability. This heavy duty door handle is designed for high traffic, abuse, and reliability.
Applications
- Exit Doors
- Rear Building Doors
- Side Exit Doors
Freight
Due to the size of Gladiator commercial door kits, this product ships by common carrier. Each door kit is carefully packaged to ensure no damage. Doors and frames are custom pallet crated to ensure safe transit to your job site or preferred location. A lift gate service is included standard will all commercial door deliveries.
