Commercial Hollow Metal Steel Door Only, 31-3/4 Inch x 83-1/8 Inch (2870), 161 Cylindrical Lock Prep, Hinge Reinforcement, Closer Reinforcement, UL Listed

Replace Your Steel Door Only And Not The Frame

This door is prepped to match most of the common hinge and lock hole locations, so that you can easily replace your existing commercial steel door without having to replace the door frame. Our Gladiator commercial door replacement can save you time, money, and labor. If you don't see your hinge and/or lock location contact customer service at 877-412-3667 to receive a custom quote. We can manufacture commercial steel doors with custom hinge and lock locations.

Heavy Duty Door Replacement

This commercial metal door slab is constructed from heavy duty 18 gauge steel with a full body polystyrene core. The metal door is galvannealed to help prevent rust and promote adhesion to paint. The door comes finished with a baked on rust inhibiting primer which can act as the finish coat or as a prime coat for paint.

How To Replace Your Hollow Metal Door

Replacement is as easy as removing the old, existing door from the frame. Remove the lever or knob handle from the door and the hinges. Install the hinges on the new replacement door. Hang the new door and then install the original lever or knob handle. If your door has additional prep such as glass window or door vent, contact us at 877-412-3667 and we can fabricate your door with additional prep work.

Before You Order

Before you place your order be sure to verify door dimensions, hinge locations, and lock hole locations.

Exact Door Dimensions

• Exact Door Width: 31-3/4"
• Exact Door Height: 83-1/8"
• Known as a 2870 door slab
• Door Thickness: 1-3/4"

Hinge Locations

When checking hinge locations, always measure from the top of the door to the top of the hinge. If unsure, call customer service at 877-412-3667.

Lever Handle Hole Prep

This metal door features a 161 prep, which is a cylindrical bored hole to accept all standard 2-3/4" backset commercial door lever handles and knobs.

How To Measure Backset

When checking the backcheck measure from the face of the door to the center line of the cylindrical lock hole. All commercial doors use a 2-3/4" backset as an industry standard.

How To Measure The Lever Handle Hole Location

To measure the lever handle hole location, measure from the top of the door to the center line of the cylindrical lock hole.

Lever Handle Hole Backset: 2-3/4"

Having Trouble Or Measurements Not Matching?

Don't worry! Automatic Door and Hardware is here to help. Many metal doors are legacy models that may have unique preps. Automatic Door and Hardware has the ability to manufacture custom size replacement doors with custom hinge and lock locations. Contact us at 877-412-3667 for a quotation. We have engineers and specialists on staff that are eager to help aid you in the right door replacement.

Available Options

Optional Fire Label

If the commercial door is going to be installed on a fire wall, we offer a variety of fire ratings to choose from up to 3 hours for exterior doors and 90 minutes for interior doors. All doors come standard UL Listed.

Additional Features

Heavy Duty

The Gladiator metal door is commercial industrial grade and manufactured from 18 gauge steel. The door is well insulated with a full body of polystyrene, providing energy efficiency to your building. Top and bottom caps provide additional structural integrity to the Gladiator metal door so that it will not bend or deflect. 12 gauge closer reinforcement as well as 7 gauge hinge reinforcement allows the Gladiator metal door to provide smooth opening and closing for years, without the hassle of the commercial door hardware breaking down.

Galvannealed and Rust Inhibiting Finish

Each Gladiator metal door and frame is Galvannealed, allowing it to help prevent rust. Additionally, each metal door and frame comes with a baked on prime coat finish. This primer is rust inhibiting also helping to prevent rust.

Insulated Core - Not Hollow Core!

Gladiator metal doors come with a premium insulating core known as polystyrene. Lower grade metal doors are not insulated or feature cardboard insulation known as honeycomb. Our polystyrene core will help maintain your building's energy year round. The insulated door will also provide more sound deadening than that of a hollow core metal door.

Brand: Automatic Door and Hardware
Model: Gladiator
Part Number: HMD-2870-161
Catalog: Commercial Steel Doors
Level: Heavy Duty, SDI Level 2, 18 Gauge Steel Face Sheets
Compliance: Meets ANSI A250.8-1998 (SDI-100)
Hardware Preparations: In Accordance With ANSI A250.6-1997
Hardware Locations: In Accordance With ANSI/DHI A115
Nominal Door Size: 32" x 84"
Exact Door Size: 31-3/4" x 83-1/8"
Hinge and Lock Locations: Specify In Options
Lock Prep: 161 Cylindrical Lock
Lock Prep Backset: 2-3/4"
Reinforcement: 7 Gauge Hinge Reinforcement, Door Closer Reinforcement
Door Finish: Factory Applied Baked On Rust Inhibiting Gray Primer. Primer can be painted after installation if desired, but not required.
Fire Rating: Specify In Options - Optional WHI Up To 3 Hour Fire Rating For Exterior Doors and 90 Minutes For Interior Doors
Buy American Act Compliance: Made In USA
Core: Polystyrene
Hinges: Universal Hinge Preparation For Field Conversion From Standard Weight (.134) Hinges To Heavy Weight (.180) hinges
Edges: Square Hinge and Lock Edges - Full Height, Epoxy Filled Mechanical Interlock Edges
Channels: Top and Bottom Channels
R Value: 7.14
U Value: 0.14
STC Rating: 33