• 877-412-3667 9AM - 3PM CST

  • ORDERS OVER $200 SHIP FREE - CONTINENTAL US ONLY

Navigate to the Automatic Door and Hardware homepage

USA Company
​Located in Texas

-
Home > Door Hardware > Panic Bar Exit Devices > Panic Bar Exit Device Help Center > How do I install an exit device?

How do I install an exit device?


How to Install an Exit Device | Automatic Door and Hardware

How do I install an exit device?

Installing an exit device on your commercial door is an important safety measure that ensures a quick and easy escape in the event of an emergency. An exit device, also known as a panic bar, is a door hardware device that allows people to exit a building quickly and safely by pushing a bar that releases the latch.

If you're looking to install an exit device on your commercial door, you've come to the right place. In this article, we'll walk you through the steps of installing an exit device.

Step 1: Gather Tools and Materials

Before you begin the installation process, it's important to make sure you have all the necessary tools and materials. Here's what you'll need:

  • Exit device
  • Measuring tape
  • Drill and drill bits
  • Screwdriver
  • Level
  • Pencil
  • Template
  • Screws and fasteners
  • Cutting tool (if necessary)

Step 2: Measure the Door

Measure the width of the door to determine the size of the exit device you'll need. You should also measure the backset, which is the distance from the edge of the door to the center of the lockset.

Step 3: Prepare the Door

Remove any existing hardware from the door and make sure the surface is clean and free of debris. If necessary, use a cutting tool to create the appropriate holes in the door for the exit device.

Step 4: Install the Strike Plate

Attach the strike plate to the door frame using screws and fasteners. Make sure the strike plate is level and aligned with the latch bolt. Test the latch bolt to ensure it engages smoothly with the strike plate.

Step 5: Install the Exit Device

Place the exit device template on the door and use a pencil to mark the mounting holes. Drill pilot holes in the door at the marked locations.

Attach the exit device to the door using screws and fasteners, making sure it is level and aligned with the strike plate. Test the device to ensure it operates smoothly.

Step 6: Test the Exit Device

Test the exit device to ensure it operates smoothly and releases the latch bolt when pushed. If the device is difficult to operate or doesn't release the latch bolt, make any necessary adjustments to the strike plate or device.

Step 7: Finish Up

Once you've installed and tested the exit device, attach any necessary trim or covers to the device and door. Make sure the device is secure and operates smoothly before using it in an emergency situation.

Conclusion

Installing an exit device is an important safety measure for any commercial building. With these simple steps, you can install an exit device on your commercial door.Commercial door panic bars and exit device hardware are available at www.autodoorandhardware.com.

Disclaimer: The material in this article has no regard to the specific installation, building code requirements, law requirements, authority having jurisdiction, local or state requirements, or any particular needs of any viewer. This article is presented solely for informational and entertainment purposes and is not to be construed as a recommendation or solicitation. Nor should any of its content be taken as advice. Automatic Door and Hardware is not an installation advisor. The views expressed in this article are completely speculative opinions and do not guarantee any specific result. Commercial doors, hardware, and automatic door parts should only be worked on by trained, qualified, and licensed professionals; failure to do so can result in danger. Any opinions expressed in this article are subject to change without notice. Automatic Door and Hardware is not under any obligation to update or keep current the information contained herein. Automatic Door and Hardware may have an interest in the securities and commodities of any entities referred to in this material. Automatic Door and Hardware accepts no liability whatsoever for any loss or damage of any kind arising out of the use of all or any part of this material. Automatic Door and Hardware recommends that you consult with a licensed and qualified professional before making any modifications or repairs to commercial doors, automatic doors, or hardware components of those doors. The content covered in this article is NOT to be considered as advice. I’m NOT an adviser. These are only my own personal and speculative opinions, ideas, theories, hypotheses, charts, technical analysis, insights, and curated news publications. The technical analysis in this article is completely speculative and does NOT guarantee any specific result. The technical analysis in this article has NO proven rate of accuracy. Do NOT repair or modify your doors and/or hardware based upon the analysis presented in this article. Always do your own research and only use trained and licensed professionals for any repairs or modifications. I will NOT be held liable for any of your personal repairs or modifications or any losses/damages that you may incur if you do repair or modify your doors and/or hardware. Information provided through this article is provided to you as is without any express representations or warranties of any kind, and we make no representation or warranty that this article (or any information provided in response to your inquiry), will be accurate, complete, or error-free. You agree that you must evaluate all information and responses, and that you bear all risks associated with, the use of this article, including any reliance on the accuracy, completeness, or usefulness of any information or materials made available through this article. This article is purely for entertainment purposes only!

Get The Parts That Fit

Filter your results by entering your commercial door's Make and/or Model to ensure you find the parts that fit your door.

Select Door

Need A Quotation?

Receive A Free Quotation Immediately

Email [email protected] or call 877-412-3667 with the product you are interested in, the quantity, and any other requirements you may have. One of our specialists will email you back a free quotation shortly. Did you know we offer free design help? If you are unsure of the product you need, but know the scope of what function or application you need, our design team can help! Contact us with your inquiry today.

Empty Cart