Sun Valley Storefront Door ADA Compliant Handicap Automatic Door Opener
The Commander commercial automatic door opener is designed for installation on Sun Valley commercial glass storefront doors. This automatic door opener kit is designed to install top jamb on the Sun Valley storefront door frame and transform the manual swinging door system to an electrically powered automatic swinging door system. Front entrance storefront doors are known for high traffic, heavy glass, and commercial building codes and compliance. As a result, the Commander automatic door operator is UL Listed, ADA compliant, and meets commercial building codes allowing it to be installed in all commercial storefront door applications. The heavy duty motor and steel gear train allows it to power open and close any Sun Valley storefront entrance door.
Modes Of Operation
Business Hours Operation (Automatic/On)
In this mode of operation, the Commander automatic door opener's control switch is set to the "On" or Automatic position. In this mode the "push to open" activation buttons are active.
How To Enter: Pedestrians can press the "push to open" activation button and the Commander door operator will open the the door.
How To Exit: Pedestrians can press the "push to open" activation button and the Commander door operator will open the the door.
After Hours Operation (Closed/Off)
In this mode of operation, the Commander automatic door opener's control switch is set to the "Off" or Manual position. In this mode the "push to open" activation buttons are inactive.
How To Enter: Pedestrians must manually open the door by hand to enter the building.
How To Exit: Pedestrians must manually open the door by hand to exit the building.
Push And Go Operation
In this mode of operation, the Commander automatic door opener will recognize the slightest movement of the door. When a pedestrian begins to push or pull the door open, the Commander door opener senses this, and will automatically open the door for the pedestrian. The Commander door opener is factory set with this feature on. However, it can be disabled in the field through the programming software on the controller.
Hold Open Operation
In this mode of operation, the Commander automatic door opener's control switch is set to the "Hold Open" position. The Commander door opener will be energized and will hold the door in the full open position, until the control switch is changed to "On" or "Off". This mode is used for times of the day where traffic is heavy or any application when the door needs to remain open.
Compliance
UL Listed
The Commander door opener is UL listed. This allows the Commander door opener to be installed in commercial and industrial buildings.
15lb Opening Force
When automated the Commander automatic door opener will transform your commercial door way into a barrier free ADA compliant entrance. The Commander door opener requires no more than 15lbs of force to stop the door from moving as required per ADA requirements section 4.13.12.
ANSI A156.19
The Commander door opener complies to ANSI A156.19 requirements for the low energy model. ANSI/BHMA standards are national requirements for automatic door openers in order to be installed in commercial buildings.
ADA - Americans With Disabilities Act
The Commander door opener software and mechanics is engineered such that the door opener can be installed in complete compliance with the ADA requirements.
Reverse On Obstruction Function
The Commander door opener features a built in safety function that allows the door opener to sense if there is an obstruction when the door is opening or closing. For example, if an obstruction is detected as the door is opening, then the Commander door opener will automatically close the door so that the door will no longer be pushing against the obstruction.
Safety Sensor Interface
The Commander automatic door opener's controller features a power supply interface and relay inputs for additional safety sensors. Additional ADA compliant door sensors are available with the Commander automatic door opener.
What's Included- 1 Each Commander Commercial Industrial Automatic Door Opener, UL Listed
- Outswing Arm With Bushing and Hardware
- Connecting Arm With Hardware
- On/Off Power Switch
- ANSI/BHMA and ADA Compliant Door Safety Decals
- Installation Instructions
- Wiring Diagram
Specifications
- First Automatic Door Opener For 99% Of Commercial Door Applications
- Heavy Duty Steel Gear Train To Absorb Impact and Abuse
- Heavy Duty Closing Spring Provides Safe and Smooth Closing Operation Even If Power Goes Out
- Low Energy Circuit Design With 1 Amp Current Draw
- Compatible With All Brands Of Activation Accessories
- Can Be Integrated With All Brands Of Access Control Hardware
Storefront Door Compatiblity
- Works With Sun Valley Storefront Doors