Touch Pad Panic Bar Rim Exit Device With Outside Storeroom Lever Handle and Double Door Strike For Hollow Metal Double Door (Construction Pro Hardware Swing Master Series 40)

The Construction Pro Hardware Swing Master Series 40 double door exit device is a unique application which allows you to mount our rim exit device on the active door panel and a special door strike on the inactive door panel. This is a cost effective method compared to a surface vertical rod exit device alternative.

Includes

• 1 Each Construction Pro Hardware Swing Master Series 40 Rim Exit Device
• 1 Each Double Door Strike
• 1 Each Outside Storeroom Lever Handle - Key Retracts Latchbolt
• 2 Keys
• Hardware

Features

• The exit device is a non-handed design for easy installation.
• The auxiliary guarded latch deadlocks latch bolt automatically locking when the door is closed for the most secure exit.
• This rim exit device has a high shock-resistant latching mechanical design for protection from vandalism or break ins.
• All of the this exit device inside components are made of high rust-resistant alloy or heavy electroplated steel allowing it to last under the most abusive door operating conditions. When we say commercial grade, we mean commercial grade.
• The Construction Pro Hardware exit device is baked on powder coated and electroplated or architectural base finishes are used on all exposed surfaces. This exit device looks great on all door types, hollow metal or architectural wood.
• The Construction Pro Hardware non-fire rated rim exit device comes with a dogging mechanism, allowing building owners to have a hex-key to maintain an unlatched position during peak foot traffic time. Fire rated Construction Pro Hardware exit devices do not have the dogging feature.
• Grade 2: Tested and Exceeded Over 250,000 door cycles

Applications

• Rim device deisgned to mount on active door panel. Special surface door strike mounts on inactive door panel.

Rim Exit Device Length

• The standard 36" Commando rim exit device has an actual device length of 33-15/32" used on standard 36" doors.
• The standard 48" Commando rim exit device has an actual device length of 44-3/4" used on 48" doors.
• For non standard length doors, the Cyclone exit device can be cut down on the non push pad side to the desired length. In general the proper exit device length is the door width minus 2".