What is the Bar Between Double Doors Called?

The Answer is a Mullion

When it comes to double doors, the metal bar running vertically between them is called a mullion. This term is commonly used in the door industry, and it refers to a vertical or horizontal element that separates and supports panes of glass, as well as sections of metal or wood.

What is a Mullion?

A mullion is an essential component of commercial door hardware that provides structural support for large glass or metal panels. It is usually made of aluminum or steel and is designed to fit between the two doors, creating a seal to prevent air and water infiltration.The primary function of a mullion is to provide structural stability and support to the doors. It helps to distribute the weight of the doors evenly and ensures that they remain in their proper position. In addition, mullions also provide a visual break between the two doors, creating a more aesthetically pleasing appearance.

When and How to Use a Mullion?

Mullions are used in situations where large doors need to be divided into smaller sections. They are commonly found in commercial settings such as shopping malls, airports, and office buildings. Mullions are also used in residential settings for patio doors or large windows.When installing a mullion, it is important to ensure that it is properly aligned and securely fastened to the doors. This will ensure that the doors remain stable and do not sag or bow over time. It is also essential to ensure that the mullion is properly sealed to prevent air and water infiltration.

Types of Panic Bars that Work with Mullions

Panic bars, also known as exit devices, are an essential component of commercial door hardware. They are designed to provide a quick and easy exit in case of an emergency. When it comes to mullions, there is one main type of panic bar that works with them: surface-mounted rim panic exit devices. Surface-mounted panic bars are installed on the surface of the door and are visible from the outside. They are the most common type of panic bar and are available in a range of styles and finishes to suit any application. Surface-mounted panic bars work well with mullions and can be installed with the strike directly on the mullion itself.

Conclusion

Mullions are an essential component of commercial door hardware, providing structural support for large glass or metal panels. They are commonly used in situations where large doors need to be divided into smaller sections, such as in shopping malls, airports, and office buildings. When it comes to panic bars, surface-mounted rim exit device options can be used with mullions, providing a quick and easy exit in case of an emergency. It is important to ensure that mullions are properly installed and sealed to prevent air and water infiltration, as well as to ensure that panic bars are installed correctly to ensure their proper functioning.
Commercial door panic bars and exit device hardware are available at www.autodoorandhardware.com.

Disclaimer: The material in this article has no regard to the specific installation, building code requirements, law requirements, authority having jurisdiction, local or state requirements, or any particular needs of any viewer. This article is presented solely for informational and entertainment purposes and is not to be construed as a recommendation or solicitation. Nor should any of its content be taken as advice. Automatic Door and Hardware is not an installation advisor. The views expressed in this article are completely speculative opinions and do not guarantee any specific result. Commercial doors, hardware, and automatic door parts should only be worked on by trained, qualified, and licensed professionals; failure to do so can result in danger. Any opinions expressed in this article are subject to change without notice. Automatic Door and Hardware is not under any obligation to update or keep current the information contained herein. Automatic Door and Hardware may have an interest in the securities and commodities of any entities referred to in this material. Automatic Door and Hardware accepts no liability whatsoever for any loss or damage of any kind arising out of the use of all or any part of this material. Automatic Door and Hardware recommends that you consult with a licensed and qualified professional before making any modifications or repairs to commercial doors, automatic doors, or hardware components of those doors. The content covered in this article is NOT to be considered as advice. I’m NOT an adviser. These are only my own personal and speculative opinions, ideas, theories, hypotheses, charts, technical analysis, insights, and curated news publications. The technical analysis in this article is completely speculative and does NOT guarantee any specific result. The technical analysis in this article has NO proven rate of accuracy. Do NOT repair or modify your doors and/or hardware based upon the analysis presented in this article. Always do your own research and only use trained and licensed professionals for any repairs or modifications. I will NOT be held liable for any of your personal repairs or modifications or any losses/damages that you may incur if you do repair or modify your doors and/or hardware. Information provided through this article is provided to you as is without any express representations or warranties of any kind, and we make no representation or warranty that this article (or any information provided in response to your inquiry), will be accurate, complete, or error-free. You agree that you must evaluate all information and responses, and that you bear all risks associated with, the use of this article, including any reliance on the accuracy, completeness, or usefulness of any information or materials made available through this article. This article is purely for entertainment purposes only!