Rim Panic Exit Devices with Mullions - What is the bar in the middle of a double door called?

Double doors are a popular choice for commercial buildings, as they provide a wider opening for people and equipment to move through. However, they can also present a unique challenge when it comes to security and safety. One of the key components of a double door is the bar in the middle that helps to keep the doors aligned and secure. This bar is called a mullion.

What is a Mullion?

A mullion is a vertical bar or divider that separates the two leaves of a double door. It is typically located in the middle of the opening and runs the full height of the door. Mullions can be made from a variety of materials, including aluminum, stainless steel, and wood, and can be designed to match the aesthetic of the surrounding door hardware.

The purpose of a mullion is to provide additional support and security to a double door. Without a mullion, the doors would be more susceptible to forced entry or being pushed out of alignment, which could lead to damage or injury. Mullions help to distribute the weight of the doors evenly and keep them properly aligned so they can function as a single unit.

Rim Panic Exit Devices with Mullions

When it comes to installing panic exit devices on double doors, a mullion can present a challenge. Panic exit devices, also known as crash bars or panic bars, are designed to allow for quick and easy exit in case of an emergency. However, in order to work properly, the exit device must be installed on a solid surface that can withstand the force of people pushing against it.

This is where rim panic exit devices come in. Rim panic exit devices are designed to be installed on the surface of the door, rather than being mortised into it. This makes them a good option for double doors with mullions, as they can be installed directly onto the mullion itself. The rim panic exit device will extend across both doors and provide a secure and easy-to-use exit in case of an emergency.

One important consideration when using rim panic exit devices with mullions is the placement of the device. It is important to ensure that the device is located at the correct height so that it can be easily accessed by people of all heights. The device should also be installed with proper clearance so that it can function properly and not be obstructed by the mullion or other door hardware.

Benefits of Rim Panic Exit Devices with Mullions

Using rim panic exit devices with mullions offers several benefits for commercial buildings:

• Improved safety: Panic exit devices provide a quick and easy way for people to exit a building in case of an emergency. By installing them on double doors with mullions, you can provide an even safer exit option.
• Better security: Rim panic exit devices with millions are very durable and more difficult for forced entry.

Commercial door panic bars and exit device hardware are available at www.autodoorandhardware.com.

Disclaimer: The material in this article has no regard to the specific installation, building code requirements, law requirements, authority having jurisdiction, local or state requirements, or any particular needs of any viewer. This article is presented solely for informational and entertainment purposes and is not to be construed as a recommendation or solicitation. Nor should any of its content be taken as advice. Automatic Door and Hardware is not an installation advisor. The views expressed in this article are completely speculative opinions and do not guarantee any specific result. Commercial doors, hardware, and automatic door parts should only be worked on by trained, qualified, and licensed professionals; failure to do so can result in danger. Any opinions expressed in this article are subject to change without notice. Automatic Door and Hardware is not under any obligation to update or keep current the information contained herein. Automatic Door and Hardware may have an interest in the securities and commodities of any entities referred to in this material. Automatic Door and Hardware accepts no liability whatsoever for any loss or damage of any kind arising out of the use of all or any part of this material. Automatic Door and Hardware recommends that you consult with a licensed and qualified professional before making any modifications or repairs to commercial doors, automatic doors, or hardware components of those doors. The content covered in this article is NOT to be considered as advice. I’m NOT an adviser. These are only my own personal and speculative opinions, ideas, theories, hypotheses, charts, technical analysis, insights, and curated news publications. The technical analysis in this article is completely speculative and does NOT guarantee any specific result. The technical analysis in this article has NO proven rate of accuracy. Do NOT repair or modify your doors and/or hardware based upon the analysis presented in this article. Always do your own research and only use trained and licensed professionals for any repairs or modifications. I will NOT be held liable for any of your personal repairs or modifications or any losses/damages that you may incur if you do repair or modify your doors and/or hardware. Information provided through this article is provided to you as is without any express representations or warranties of any kind, and we make no representation or warranty that this article (or any information provided in response to your inquiry), will be accurate, complete, or error-free. You agree that you must evaluate all information and responses, and that you bear all risks associated with, the use of this article, including any reliance on the accuracy, completeness, or usefulness of any information or materials made available through this article. This article is purely for entertainment purposes only!