What is the push bar called on a door?
What is the push bar called on a door?
When it comes to commercial doors, the push bar is an essential component. It allows people to exit a building quickly and safely in the event of an emergency, and is often required by building codes and regulations.
Names for Push Bars
The push bar on a door is also known by a few different names:
- Panic bar
- Crash bar
- Exit device
- Push paddle
- Push bar
Each of these terms refers to the same type of door hardware: a mechanism that allows people to exit a building quickly and easily by pushing on a horizontal bar or paddle. The term "panic bar" is perhaps the most commonly used, as it emphasizes the bar's use in emergency situations.
![]()
Uses for Push Bars
Push bars are commonly used in a variety of commercial and public buildings, such as offices, schools, hospitals, and retail stores. They are required by building codes and regulations in many jurisdictions, and are often a key component of a building's fire safety system.
The primary purpose of a push bar is to provide a safe and efficient means of egress in the event of an emergency. In a panic situation, people may become disoriented or confused, and having a clearly marked exit with a push bar can help guide them to safety. Additionally, push bars allow people to exit a building quickly and easily, reducing the risk of injury or death in the event of a fire or other emergency.
Types of Push Bars
There are several different types of push bars available, each designed for different types of doors and applications:
- Rim exit devices: These are the most common type of push bar, and are installed on the surface of a door. They are typically used on single doors or pairs of doors that are not required to lock.
- Concealed exit devices: These are installed inside the door and are not visible from the outside. They are typically used on pairs of doors that are required to lock, and provide a more aesthetically pleasing appearance.
- Mortise exit devices: These are installed inside the door and are used on pairs of doors that are required to lock. They provide a higher level of security than rim exit devices.
![]()
Conclusion
The push bar, also known as the panic bar, crash bar, exit device, push paddle, or push bar, is an essential component of many commercial and public buildings. Its primary purpose is to provide a safe and efficient means of egress in the event of an emergency, and it is required by building codes and regulations in many jurisdictions. There are several different types of push bars available, each designed for different types of doors and applications. If you need help selecting the right push bar for your commercial doors, Automatic Door and Hardware is here to help.
Commercial door panic bars and exit device hardware are available at www.autodoorandhardware.com.
Disclaimer: The material in this article has no regard to the specific installation, building code requirements, law requirements, authority having jurisdiction, local or state requirements, or any particular needs of any viewer. This article is presented solely for informational and entertainment purposes and is not to be construed as a recommendation or solicitation. Nor should any of its content be taken as advice. Automatic Door and Hardware is not an installation advisor. The views expressed in this article are completely speculative opinions and do not guarantee any specific result. Commercial doors, hardware, and automatic door parts should only be worked on by trained, qualified, and licensed professionals; failure to do so can result in danger. Any opinions expressed in this article are subject to change without notice. Automatic Door and Hardware is not under any obligation to update or keep current the information contained herein. Automatic Door and Hardware may have an interest in the securities and commodities of any entities referred to in this material. Automatic Door and Hardware accepts no liability whatsoever for any loss or damage of any kind arising out of the use of all or any part of this material. Automatic Door and Hardware recommends that you consult with a licensed and qualified professional before making any modifications or repairs to commercial doors, automatic doors, or hardware components of those doors. The content covered in this article is NOT to be considered as advice. I’m NOT an adviser. These are only my own personal and speculative opinions, ideas, theories, hypotheses, charts, technical analysis, insights, and curated news publications. The technical analysis in this article is completely speculative and does NOT guarantee any specific result. The technical analysis in this article has NO proven rate of accuracy. Do NOT repair or modify your doors and/or hardware based upon the analysis presented in this article. Always do your own research and only use trained and licensed professionals for any repairs or modifications. I will NOT be held liable for any of your personal repairs or modifications or any losses/damages that you may incur if you do repair or modify your doors and/or hardware. Information provided through this article is provided to you as is without any express representations or warranties of any kind, and we make no representation or warranty that this article (or any information provided in response to your inquiry), will be accurate, complete, or error-free. You agree that you must evaluate all information and responses, and that you bear all risks associated with, the use of this article, including any reliance on the accuracy, completeness, or usefulness of any information or materials made available through this article. This article is purely for entertainment purposes only!
